| Features: |
- Microcontroller Based design.
- PWM control of Dimmer.
- Analog Interface with external 0-12V Supply.
- Three channel (RGB) intensity control.
- Four switch control.
- Non voltage memory of last used mode and levels.
|
| |
|
| Specifications: |
| Input |
| Input Voltage: |
12V DC |
| Input Current: |
4 Amps Max. |
| Analog input: |
0-12V(10k impedance withstanding upto15V DC |
|
|
| |
| Output |
| No. of channels: |
Three |
| Load current on each Channel |
Able to deliver upto1Amp |
|
| |
| Operation: |
- Connect 12V DC to input connector with proper polarity marked on pcb at input connector.
- Connect outputs Led strip as per polarity marked on pcb at output connector.
- Switch ON& Control the intensity of Led’s (0-100%) by rotating Potentiometer provided on front panel.
|
| |
Control Switches |
-
ON/OFF SWITCH : Press the switch to power on Led strip.
-
Press the ‘Mode’ selector to change the different
-
Modes of Led strip Dimming operations (Default 6 Modes of operations)
-
Control the intensity of LED’s existing ‘ON’ mode From 1-100% by pressing UP/DOWN keys.
|
| |
Modes : |
-
Mode 1: channel 1 (Red Led) with intensity control.
-
Mode 2: channel 2 (Green Led) with intensity control.
-
Mode 3: channel 3 (Blue Led) with intensity control.
-
Mode 4: RGB Combined output.
-
Mode 5: Serial Mixing Different colour.
-
Mode 6: Blinking of Seven Rainbow colour with Speed Up& Down.
|
| |
Note : |
-
Connect 0-10V DC input at Analog input connector with proper polarity.
- For Analog interface control, Should not press ON/OFF switch after powering up the unit.
-
Once ON/OFF switch is press, it will enter into dimmer mode & Analog control will not play any control.
-
For Analog input control vary the input from 0-12V for Led’s OFF to Full Bright control
|
|
|
|
|
| |
