| Model Number : MB0941 005 100 |
| |
| Features: |
- Wide Input operating Voltage
- High Efficiency
- Less weight
|
|
| Electrical Specifications: |
| Input Voltage: |
AC 160V~280V |
| Input Frequency: |
47-63Hz |
| Maximum Input Current: |
< 2 Amp |
| Inrush Current: |
<50Amp |
| Output Voltage: |
5.0V ± 0.5 Vdc |
| Output voltage adjustment |
4.0-6.0 V(Trim.pot on PCB Module) |
| Output Current: |
10A DC |
| Line and load regulation: |
<5% |
| Ripple : |
<1% of output voltage |
| Noise: |
<2% of output voltage |
| Efficiency: |
75% at 230V ac and full load |
| Leakage Current: |
<1mA |
| Indication |
Output ON LED |
|
|
| Environment Specifications: |
| Operating Temperature: |
0°-50°C |
| Operating Relative Humidity |
0-95% RH |
| Storage Temperature: |
-20 to 70° |
|
|
| Protections: |
| Input Over Current: |
Fuse and MOV for Surge, Spike Protection |
| Output Over Current: |
CV/CC Mode |
| Output Short Circuit: |
Auto recovery of output voltage |
| Input Under Voltage Protection: |
< 150 V ac output will shut down |
| Input Over Voltage Protection: |
290V ac output will shut down |
| Withstanding Voltage: |
2000V AC |
| Insulation Resistance: |
10MΩ @ DC500V |
| Leakage Current: |
<1mA |
| Efficiency: |
75% at 230V AC & full load |
|
|
| |
| Safety Requirements: |
| Insulation Resistance between Input & Output: |
5MΩ with 500V DC Megger |
| Break down High voltage test: |
2KV AC RMS for 1 Minute |
| EMI/EMC: |
Meets the requirements of EN55022 Standards |
|
| |
| Terminations: |
AC Input Connector : |
3 Pin Wago type Connector With 7.5mm Pitch |
Output Connector: |
4 Pin Wago type Connector With 5mm Pitch |
|
| |
| Enclosure: |
Type: |
Module Meshtype Enclosure |
Material: |
Mild steel |
Accessibility: |
Easy accessible to open top and bottom cover |
| Dimensions: |
155mm(L)X90mm(W)X50mm(H) |
|
| |
| |
|
| |
