13.8V/5A SMPS Battery Charger with  Plastic Enclosure  
  The SMPS Battery Charger is designed to withstand for the input operating voltage range of 140 -300VAC and output power upto 70W to Charge the Various Types of Batteries  as per customer  requirements.  
     
 
 
 
   
 
Model Number : SA PS 03 703 014 050  
 
Features:
  • Universal Input Voltage  Range
  • High Efficiency
  • Less weigh
Electrical Specifications:
Input Voltage:

AC 140V~300V

Input Frequency: 47-63Hz
Maximum Input Current:

< 1Amp

Inrush Current: <50Amp

Output Voltage:

13.8V ± 0.5 Vdc

Output Current:

5A DC

Line and load regulation: <5%
Ripple :  <1% of output voltage
Noise:    <2% of  output voltage
Efficiency:    75% at 230V ac and full load
Leakage Current: <1mA
Environment Specifications:
Operating Temperature: 0°-50°C
Operating Relative Humidity 0-95% RH
Storage Temperature: -20 to 70°
Protections:
Input Over Current: Fuse and MOV for Surge, Spike Protection
Output Over Current: CV/CC Mode
Output Short Circuit: Auto recovery of output voltage

Over Temperature Protection:

Output Shut Down & Auto Recovery

Withstanding Voltage: 2000V AC
Insulation Resistance: 10MΩ @ DC500V
Leakage Current: <1mA
Efficiency:   75% at 230V AC & full load
 
Safety  Requirements:
Insulation Resistance between Input & Output: 5MΩ with 500V DC  Megger
Break down High voltage test: 2KV AC RMS for 1 Minute
EMI/EMC: Meets the requirements of EN55022 Standards
 
Terminations:

AC Input Connector :

6A,3 Pin Power Chord of  1.8 mtr length..

Output Connector:

40/38 of Twin Parallel wire  with Crocodile Clips

 
Enclosure:

Type:

Plastic Enclosure

Material:

ABS

Accessibility:

Easy accessible to open top and bottom cover

Dimensions: 155mm (L) X66mm (W) X60mm (H).
 
 
 
 
 
     
 
 
©Copy Right Bhagyashree Industries